2 x 2 Quad Analog Composite Multi Viewer with Full Picture Display
By: FOR-A
Video and Audio Systems for Broadcast Post-Production, and Professional Video
FOR-A : MV-40F
Description
The For-A MV-40F Quad Viewer can be used to display 4 analog CCTV cameras on a single screen. In addition to quad viewing, this unit supports 2-split, 3-split, 4-split, and Picture-In-Picture camera display modes.
Cameras can also be viewed in full screen, either by manually selecting a camera or by setting this unit to auto switch between cameras at timed intervals. This unit can also be set to auto switch between camera inputs and alarm/lost video detection signals. Up to 8 characters with positionable titles can be applied to each camera.
Features
MV-40F features include:
- 8 pre-set split screen layouts of 2-split, 3-split (x2), 4-split, or P-in-P (x3) provided.
- Half-size windows in 2- and 3-split screen displays allow for any part of the original input images to be viewed.
- VTR input / output connectors.
- 2 x zoom views on playback.
- Auto sequential switch function between four channels.
- Freeze camera input views as necessary
- Asynchronous, color or B/W, and mixed inputs supported
- Remote control and alarm interface
- Date/Time display (with an external time corrector)
- Up to 8 characters per camera channel, title display
Specifications
| Video Standard | NTSC |
| Video Inputs | Video Inputs: BNC x4 looping VTR Input: BNC x1 |
| Video Outputs | Monitor Output: BNC x1 (Full screen view or split screen view) VTR Output: BNC x1 |
| Display Modes | Full, Quad, P-in-P 1-3 (1 full screen and between 1-3 inset screens), 2-split and 3-split vertical, 2-split and 3-split horizontal (VTR playback allows Quad screens to be Individually zoomed, P-in-P screens can be user positioned and half size screen view of 2-split or 3-split can be user adjusted.) |
| Character Display | Camera Title: Alphabet, numbers, symbols, 8 characters / 1 line max, positionable Data / Time: MM-DD-YYYY, H:M:S (24 hour indication) for NTSC DD-MM-YYYY, H:M:S for PAL as factory default Data format YYYY-MM- DD can also be selected Special Display: Automatically changes to alarm screen, "ALARM" text display |
| Interfaces | Remote/alarm input/output connector, 25-pin D-sub (female) Remote: TTL negative logic pulse (more than 100ms width) Time Adjust: TTL negative logic pulse (more than 100ms width), minute signal Alarm Input: TTL negative logic pulse (more than 100ms width) or level Alarm Output: Make break contact, max. 24VDC 100mA RS-232C: Asynchronous, full duplex, 9600 bps transmission speed, 8-bit data length, 1-bit stop bit, and no parity |
| Storage System | Menu setting details and time for timer are backed up, maintained for approximately 5 years after the power is shut down for Setting Data (when using a lithium battery) |
| Power Requirements | 100-240VAC |
| Power Consumption | 100VAC: 12W 220VAC: 12W |
| Weight | 8.3 x 1.7 x 13.8" (212 x 44 x 350mm) - half rack 1RU |
| Weight | 4.2 lbs (1.9kg) |
Resources & Documents
| mv-40f.pdf | Datasheet |